RatRig

Useful information for operation and maintenance of our Rat Rig 50x50x50.

  1. Rat Rig V-Core3.1 Details

Sending print to Rat rig

SUPERSLICER SETUP

  1. Download latest release of Super Slicer Download
  2. Set up printer as RatRig-V-Core-3-500
  3. Set the filament to PETG / PLA
  4. Go to printer settings and change following fan speeds on expert mode
Setting value
Bridges fan speed 40%
Max fan speed 40%

RAT RIG SETUP

Connecting to Rat OS network on your computer.

  1. Go to the WiFi settings on your computer and connect to RatOS
Wifi RatOS
Password raspberry
  1. Next, on the internet browser window type in following IP address 192.168.50.1
  2. You should be now connected to the Rat Rig console on your browser.
  3. Upload the Gcode and Print !

RatRig Website

Once connected to the website you will find different tabs with information about the printer/print.

  1. The first thing that will open is the main dashboard

Main Dashboard

Here you will see a menu on the left will all the tabs neccesary to interact with the printer. Additionally, there will be a menu displaying recent errors as pictured.

  1. There is also the option of seeing different statistics about the printer, this includes print time and filament usage.
  2. To print a file first head to the G-code Files tab, this will open a list of previous print as well as the option to upload a file of your choice (.gcode)

G-code Files

  1. Once the file has been uploaded, it will show up at the top of the list. From this point you can select the file and click it, a menu should pop up with different options.

G-code Option Menu

  1. If you think the file is ready to go click on the “print start” option. However, there’s also the option of visualizing it beforehand.